4RC220-H56 - 2.3 hp, 3ph
In stock
Sku:
4RC220-H56
4RC220-H56 - 2.3 hp, 3ph
The Republic 4RC220-H56 is a three phase, high pressure regenerative blower with a maximum air flow of 35 cfm, maximum vacuum of 201 in.H2O, and maximum pressure of 297 in.H2O.
Republic Regenerative Blowers are available in single stage (one impeller), double stage (two impeller), or triple stage (three impeller) configurations. The impeller is directly connected to the motor shaft, providing powerful force without undue friction. The bearings are outside the compression chamber, ensuring maximum operational reliability under high differential pressure.
A regenerative blower, also called a side channel blower or ring compressor, pulls air or gas into a side channel through the air inlet. This air is progressively accelerated and pressurized by one or more impellers rotating inside the impeller chamber. The resulting pressurized air or gas is discharged through the exhaust outlet.
The Republic 4RC220-H56 is a three phase, high pressure regenerative blower with a maximum air flow of 35 cfm, maximum vacuum of 201 in.H2O, and maximum pressure of 297 in.H2O.
Republic Regenerative Blowers are available in single stage (one impeller), double stage (two impeller), or triple stage (three impeller) configurations. The impeller is directly connected to the motor shaft, providing powerful force without undue friction. The bearings are outside the compression chamber, ensuring maximum operational reliability under high differential pressure.
A regenerative blower, also called a side channel blower or ring compressor, pulls air or gas into a side channel through the air inlet. This air is progressively accelerated and pressurized by one or more impellers rotating inside the impeller chamber. The resulting pressurized air or gas is discharged through the exhaust outlet.
Related Products
